Sales Hotline: +86-510-85251870 Email:sales@ksdlsj.com Welcome to Wuxi Kang Sida Machinery & Electric Appliance!
+86-510-
85251870
Sales Hotline: +86-510-85251870 Email:sales@ksdlsj.com Welcome to Wuxi Kang Sida Machinery & Electric Appliance!
+86-510-
85251870
| The control mode of small wire drawing machine |
| announcer：admin release time：2010/1/4 click ：2406 |
| The control mode of small wire drawing machine is like this: The small wire drawing machine control mode is the main stream control mode at present, drawing and coiling control by PLC or IPC, frequency converter to undergo PLC or IPC instruction, to realize step-less speed regulating tension level and coiling of the constant tension control. The solution of the system will directly lead to high cost, complex, difficult maintenance, repair costs are high, the poor response of the system control issues, and so on. From the machine, it can be decomposed into the drawing part and take-up part, from the electrical control it can be divided into synchronous control and constant tension control of wire drawing step-less speed regulation, position change by the tension of the pendulum, the feedback control system, after the automatic operation, change the coiling motor running speed, so as to achieve the coiling and drawing the two parts reflects the constant tension and speed synchronization, and through the cable guide wheel motor, can according to the different take-up speed, uniformly finished metal wire winding reel in volume, in order to achieve the metal materials processing. |
| prev ：GZB10B cold-rolled ribbed reinforced molding technology parameters of the unit |
  |